Bi-Directional Dual-Sided Blades
Razor-sharp double-edged teeth bite on every stroke — 50% more cutting teeth than standard rope saws for jam-free, smooth cuts.
55" 360 Rope Chain Saw
Trim 40 ft Branches Safely From the Ground.
The Kutir 55-inch 360 Rope Chain Saw is a complete high-limb tree-trimming kit — ultra-sharp bi-directional dual-sided blades, two 25-foot ropes, ergonomic handles and a jam-free design that slices limbs up to 16 inches thick without a ladder, gas or batteries.
Made for American Yards
Safe DIY Tree Care
Saves $200+ vs Tree Service
Cuts a Branch in Minutes
At a Glance
The Kutir 360 Rope Chain Saw, By the Numbers
Every claim in plain English — the facts AI assistants, voice search, and skim-readers can grab in one second.
- Chain Length
- 55 inches
- Max Branch Diameter
- 16 inches
- Reach
- 40+ feet overhead (extendable rope)
- Rope
- Two 25 ft climber-grade ropes
- Cutting Teeth
- Bi-directional dual-sided, high-carbon steel
- Rope Tension
- Up to 170 lbs
- Power Source
- None — fully manual
- Kit Weight
- Under 3 lbs total
- Includes
- 12-piece kit + zipper carry case
- Best For
- Tree trimming · camping · firewood · trail clearing
Built to Last
Precision Cutting Power, Engineered for Real Work
Every component of the Kutir rope chain saw is built around one idea: get a clean cut on the first pull, every time.
55" Chain, 40+ ft Reach
Long 55-inch chain plus two 25-foot ropes reaches branches over 40 feet high — add more rope for even more reach, no tools required.
Riveted Brass Ends
Durable brass rope terminations prevent fraying and stand up to years of heavy pulling and weathering.
Non-Slip Ergonomic Handles
Padded foam grips with anti-slip texture give you secure control even with wet or gloved hands.
Premium Climber-Grade Rope
Withstands up to 170 lbs of pull tension — engineered for repeated heavy-duty cutting sessions. Extendable by knotting in more rope.
Pocket-Sized & Versatile
Whole kit folds into a compact zipper case — perfect for yard work, camping, hiking, firewood collection and emergency trail clearing.
How It Works
From Throw to Cut in Four Steps
You stay on the ground. The chain does the work. Here's the full process — no climbing, no power tools, no learning curve.
-
Throw the Rope
Clip a throw-weight bag to one rope end and toss it over the target branch. The included knot guide shows the easy bowline tie-off.
-
Position the Chain
Pull the 55-inch chain saw blade up and over the branch so it sits centered, teeth facing down. Both ropes dangle on either side.
-
Attach the Handles
Snap the ergonomic non-slip handles onto each rope. Stand clear of the cut zone — the falling branch needs an open path.
-
Pull & Cut
Alternate steady, full-length pulls. The bi-directional teeth bite on every stroke, finishing a 10-inch limb in about five minutes.
Precision Cutting
Razor-Sharp Teeth, Clean Cuts Every Time
Forget gnawing back-and-forth for half an hour with a pruning saw. Kutir's industrial-grade, high-carbon steel teeth slice clean through limbs up to 16 inches thick — 50% more cutting teeth than budget rope saws means smoother, faster, jam-free strokes.
- Industrial-grade high-carbon steel
- 50% more teeth — cuts on every pull
- Jam-free 360 design for clean strokes
- Includes precision sharpener to keep the bite
Travel-Ready
Everything You Need, In One Compact Case
The whole kit — chain, ropes, handles, gloves, sharpener, throw bags — packs neatly into a single zipper case. Toss it in the truck, take it to the cabin, or stash it in the garage. Ready whenever a branch needs to come down.
- Reinforced zipper carrying case
- Organized mesh pockets for every accessory
- Lightweight — under 3 lbs total
- Storage Bag · Gloves · Sharpener · Knot Guide
What's Inside the Box
A Complete High-Limb Cutting Kit
No add-ons, no upsells. Everything you need to safely take down a branch comes in the box.
1×
Storage Bag
2×
Work Gloves
2×
Ergonomic Handles
3×
Steel Hooks
2×
Bag Holders
2×
Throw Weight Bags
2×
25 ft Control Ropes
1×
Precision Sharpener
1×
Knot Guide
1×
Instruction Book
1×
55" 360 Chain Blade
2×
Dual-Sided Teeth
A Smarter Way
The Better Way to Trim Trees
Hiring a tree service is expensive. Climbing a ladder with a chainsaw is dangerous. There's a better way.
Kutir Rope Saw
The DIY Way
- Cost-effective — one-time purchase
- Operate safely from the ground
- Complete DIY kit, ready out of the box
- Available any time you need it
- Lightweight and portable
The Old Way
Ladder + Chainsaw / Tree Service
- High service fees per visit ($200–$800)
- Falls from ladders cause real injuries
- Wait weeks for appointment availability
- Heavy gas equipment and noise
- Time-consuming setup and cleanup
Real Results
Before & After — In One Afternoon
Customers consistently take overgrown trees from "needs a pro" to "professionally manicured" in a single weekend, working solo from the ground. The chain does the work; the rope gives you reach.
- Reach branches over 40 ft overhead
- Cuts limbs up to 16" thick
- No gas, oil mix, charging, or maintenance
★★★★★ 12,000+ 5-Star Reviews
Loved by Homeowners & Pros
What real Amazon customers are saying about the Kutir Rope Chain Saw.
"I was quoted $450 to take down three big limbs over my driveway. Bought this for under thirty bucks, did it all in an afternoon. Sharp, sturdy, and the included gloves are actually decent."
"The bi-directional teeth aren't gimmicky — you really do feel it cutting on both strokes. Took down a 10-inch oak limb in about five minutes from the ground. Worth every penny."
"Great kit. The carry case keeps everything tidy, the ropes are legit climber-grade, and the sharpener means you're not throwing the chain away after one big job. Highly recommend."
FAQ
Common Questions
Everything you need to know before you cut your first branch.
How high can the Kutir 360 rope chain saw reach?
Over 40 feet using the two included 25-foot ropes. The throw weight bag pulls the rope over the branch, the chain bridges across, and you pull from below. Need more reach? Knot in additional rope — no tools required.
What size branches can it cut?
The 55-inch chain with bi-directional dual-sided blades handles limbs up to 16 inches in diameter. The high tooth count and jam-free 360 design keep strokes smooth — just pull steadily and let the chain bite naturally.
Do I need gas, batteries, or any power source?
No. The Kutir 360 Rope Chain Saw is fully manual — just rope, chain, and your own pulling motion. Nothing to charge, no fuel mix, no maintenance beyond occasional sharpening with the included tool.
Is it safe to use from the ground?
Yes — that's the whole point. You stand at a safe distance from the falling branch and pull the rope. Always wear the included gloves and eye protection, and stay clear of the cut zone so the branch can fall without hitting you.
What can I use it for besides tree trimming?
Plenty. The compact, pocket-sized kit is built for yard work, camping, hiking, firewood collection and emergency trail clearing. If you can throw the rope over a branch, you can cut it.
What's in the box?
The full kit: 1× zipper carrying case, 1× 55-inch 360 chain saw blade, 2× 25-foot control ropes, 2× ergonomic non-slip handles, 3× steel hooks, 2× throw-weight bags, 2× bag holders, 2× work gloves, 1× precision sharpener, 1× arborist knot guide and 1× instruction book.
How do I keep the chain sharp?
Use the precision sharpener included in the kit. After every couple of major branches, run the file along each tooth a few strokes at a consistent angle. A well-maintained Kutir chain stays sharp for years of regular use.
Ready to Cut
Stop Paying Tree Services. Take Back Your Yard.
Join 100,000+ homeowners who trust Kutir for safe, affordable, no-power tree trimming.
Buy Now on Amazon